describe
Ambient
temperature
for the unit
Operation: 0℃ to 55℃
Storage and transportation: -20℃ to 60℃
Temperature
change
1.1℃/minute maximum
Humidity Normal condition: 75%(relative humidity)
Short term(within one month): 95% (relative humidity)
Vibration Operation : 0.5G or less
FANUC conducted evaluation test under the following donditions:
10 to 58Hz: 0.075mm(amplitude)
58 to 500Hz: 1G
Direction of vibration: Each of the X,Y,Z directions
Number of sweep cycles: 10
Conforminf to IEC68-2-6
Atmosphere Normal machining factory environment(For use in an environment with
relatively high levels of dust, coolant, organic solutions and so forth,
additional measures are required.)
Other
conditions
(1) Use each I/O module in a completely sealed cabinet.
(2) For ventilation within each I/O module, module interval must be 40mm
or more. Moreover for ventilation, allow a clearance of 50mm or more
aboveand below each module. Never place a device that generates a
large amount of heat below an I/O module.
(3)Install Basic module left side of Expansion module in front view.
