describe
| Range of product | Modicon X80 |
|---|---|
| Product or component type | Mixed analog I/O module |
| Electrical connection | 20 ways 1 connector |
| Isolation between channels | Non isolated |
| Input level | High level |
| Analogue input number | 4 |
| Analogue input type | Current 0…20 mA Current 4…20 mA Voltage +/- 10 V Voltage 0…10 V Voltage 0…5 V Voltage 1…5 V |
| Analogue input resolution | 12 bits 0…20 mA 12 bits 0…5 V 12 bits 1…5 V 12 bits 4…20 mA 13 bits 0…10 V 14 bits +/- 10 V |
|---|---|
| Permitted overload on inputs | +/- 30 mA 0…20 mA +/- 30 mA 4…20 mA +/- 30 V +/- 10 V +/- 30 V 0…10 V +/- 30 V 0…5 V +/- 30 V 1…5 V |
| Input impedance | 250 Ohm |
| Precision of internal conversion resistor | 0.1 % – 15 ppm/°C |
| Type of filter | First order digital filtering by firmware |
| Fast read cycle time | 1 ms + 1 ms x number of channels used |
| Nominal read cycle time | 5 ms for 4 channels |
| Measurement error | 0.25 % of full scale 0…20 mA 25 °C output 0.25 % of full scale 4…20 mA 25 °C output <= 0.35 % of full scale +/- 10 V 0…60 °C input <= 0.35 % of full scale 0…10 V 0…60 °C input <= 0.35 % of full scale 0…5 V 0…60 °C input <= 0.35 % of full scale 1…5 V 0…60 °C input <= 0.5 % of full scale 0…20 mA 0…60 °C input <= 0.5 % of full scale 4…20 mA 0…60 °C input <= 0.6 % of full scale +/- 10 V 0…60 °C output <= 0.6 % of full scale 0…20 mA 0…60 °C output <= 0.6 % of full scale 4…20 mA 0…60 °C output 0.25 % of full scale +/- 10 V 25 °C output 0.25 % of full scale +/- 10 V 25 °C input 0.25 % of full scale 0…10 V 25 °C input 0.25 % of full scale 0…5 V 25 °C input 0.25 % of full scale 1…5 V 25 °C input 0.35 % of full scale 0…20 mA 25 °C input 0.35 % of full scale 4…20 mA 25 °C |
| Temperature drift | 100 ppm/°C +/- 10 V output 100 ppm/°C 0…20 mA output 100 ppm/°C 4…20 mA output 30 ppm/°C +/- 10 V input 30 ppm/°C 0…10 V input 30 ppm/°C 0…5 V input 30 ppm/°C 1…5 V input 50 ppm/°C 0…20 mA input 50 ppm/°C 4…20 mA input |
| Recalibration | Factory calibrated on outputs Internal on inputs |
| Minimum crosstalk attenuation | 70 dB |
| Common mode rejection | 80 dB |
| Isolation voltage | 1400 V DC between channels and ground 1400 V DC between channels and bus 750 V DC between group of I/O channels |
| Output level | High level |
| Analogue output number | 2 |
| Analogue output type | Current: 0…20 mA Current: 4…20 mA Voltage: +/- 10 V |
| Analogue output resolution | 11 bits, 0…20 mA 11 bits, 4…20 mA 12 bits, +/- 10 V |
| Conversion time | <= 2 ms |
| Maximum conversion value | +/- 11.25 V +/- 10 V output +/- 11.25 V +/- 10 V input 0…30 mA 0…20 mA input 0…30 mA 4…20 mA input +/- 11.25 V 0…10 V input +/- 11.25 V 0…5 V input +/- 11.25 V 1…5 V input 0…24 mA 0…20 mA output 0…24 mA 4…20 mA output |
| Fallback mode | Predefined Configurable |
| MTBF reliability | 1400000 H |
| Operating altitude | 0…2000 m 2000…5000 m with derating factor |
| Status LED | 1 LED (green) RUN 1 LED per channel (green) channel diagnostic 1 LED (red) ERR 1 LED (red) I/O |
| Product weight | 0.155 kg |
| Power consumption in W | 2.6 W 24 V DC typical 3.2 W 24 V DC maximum 0.35 W 3.3 V DC typical 0.48 W 3.3 V DC maximum |
| Current consumption | 240 mA at 3.3 V DC |
